How to Change the Administrator Password in BIOS Step 1. Restart your PC computer. Step 2. Press the "F2" key when the operating system begins to load. This will bring you to the main BIOS menu. Step 3. Use the arrow keys to scroll down to the Security settings and then hit the "Enter" key. Step Turn on the computer, then press F10 until the BIOS menu displays, followed by the change administrator password. By selecting Setup BIOS Administrator Password from the Security tab, you can also add the setup BIOS administrator to the list. After entering your new BIOS Administrator Password, you will be prompted to click Enter. All that is well and good, but there is a way to reset the unit to factory defaults, thereby resetting the IPMI password and user to ADMIN / ADMIN. Use ipmicfg -fd and in a few seconds, the BMC will restart. It should be noted, while you are restoring to factory defaults, you will not be able to use other commands. Select Admin Password and then create a password in the Enter the new password field. Type the admin password that you entered in Step 3 in the Confirm new password field and then click OK . Click Exit to leave the BIOS Setup screen and restart the computer. 4.) Log in using the new BIOS administrator password (the password is password) 5.) Choose User Management and delete any previous ProtectTools users. 6.) Choose Change Password under User Tools to remove/change BIOS administrator password. 7.) Save the new settings & exit setup. . To disable the Password Option in Windows 11, follow these steps: Press the Windows key + R at the same time. in the Run window search box field. The User Accounts window will open. Check the Just to note, if you do intend to go the HP route, don't try removing the rtc battery. It won't remove the password, but it will reset the clock - as smc files are time coded, a large disparity between the system clock and the time encoded in the smc will cause it to fail. Regards, DP-K Try popping out the battery for a few seconds and turn on the machone again. If BIOS is not cleared, used the "sweater" method to attempt a BIOS reset. This method basically uses some kind of material to cover the laptop and force it to overheat. Upon overheating, HP laptops were programmed to shut down and reset BIOS. Figure 1. Method 2. To enter the system setup, press F12 immediately after turning on or rebooting the computer. Then select BIOS Setup. In the BIOS Setup screen, select Passwords and press Enter. The Passwords screen is displayed. Select System Password and create a password in the Enter the New Password field. On this forum, we are prohibited with assisting folks with removing BIOS passwords--ref 4d. of the rules of participation below. Rules Page - HP Support Community . There is probably a jumper on your server's motherboard that would allow you to clear the password.

how to change bios administrator password